Audi Maintenance Tips

Straight From the Import Pros

If you’re traveling through San Ramon, CA, it’s essential to make sure your Audi operates properly. To keep it running well in all types of conditions, here are a few Audi maintenance tips you should try.

Maintenance Tips for Engine

Engine problems can be expensive to fix, which is why regular maintenance is so important. Here are a few maintenance tips for your engine:

  • Remove your splash pan to see if your water pump is leaking. If there is a leak, you’ll most likely see a trail of coolant leading from the pump to the lowest area of the engine.
  • Check your timing belt for excessive wear and have it serviced as recommended by your owner’s manual.
  • Change common engine components as needed, including o-rings, seals, snub mounts and locking components.

Before doing anything with your engine, it’s wise to find your engine code number so you can get the correct auto parts. You can find the engine code by using your VIN or by looking on the driver’s side of the engine block.

Maintenance Tips for Steering and Suspension System

If your steering or suspension systems go out, you’re in for a very uncomfortable and scary ride. To keep this from happening, do the following:

  • Flush and change your power steering fluid every 30,000 miles or as recommended in your owner’s manual.
  • Listen for a low humming sound at low speeds to determine if your wheel bearing needs replacement. At higher speeds, the low hum will turn into a high-pitched squeal.
  • Check your ball joints at least once per year to see if it needs to be replaced.

If you notice problems in any of these areas, take care of them right away.

Maintenance Tips for Brake System

The last thing you want when driving at freeway speeds is for your brakes to go out. Follow these tips to minimize the likelihood of that happening:

  • Change your brake fluids every three years or 30,000 miles, whichever happens first.
  • Change your brake pads if you feel vibration or hear squealing when braking.
  • Change your brake pads if your brake pad warning light comes on.

You can find your brake code by looking up your vehicle’s VIN number or by checking with a dealer.

Learn More Audi Maintenance Tips

Want to learn more Audi maintenance tips or schedule an Audi repair? Contact European Autotech in San Ramon, California, today.

Written by European Autotech

Leave a Reply

Your email address will not be published. Required fields are marked *